Fluorine Rubber Sheet Gasket

  • Fluororubber O-ring FKM

    Fluororubber O-ring FKM

    Fluororubber O-ring FKM
    Temperature resistance :-20 ℃ -260 ℃,
    Properties: WEATHER resistance, ozone resistance, chemical resistance, resistance to most oils and solvents, especially acids, aliPHatic hydrocarbons, aromatic hydrocarbons and animal and vegetable oils. Not recommended for ketones, low molecular weight esters and nitrate-containing mixtures, poor cold resistance.
    Application: It is often used in the working environment of high temperature resistance, chemical corrosion resistance and oil resistance. It is widely used in metallurgy, chemical industry, automobile, electric power and other industries
    Common colors: brown, green.
    Medium: resistant to strong acid and alkali liquid, oil

  • Nitrile O-ring

    Nitrile O-ring

    Nitrile O-ring:
    Temperature resistance:-40 degrees Celsius 120 degrees Celsius.
    Performance: oil resistance, wear resistance, heat resistance, solvent resistance and high pressure oil characteristics, but not suitable for polar solutions, such as ketones, ozone, nitrohydrocarbon.
    Application: Often used in fuel tank, lubricating oil and petroleum hydraulic oil, ethylene glycol hydraulic oil, dilipid lubricating oil, gasoline, water, silicon grease, silicone oil and other media. Medium: Water, gasoline, lubricating oil, hydraulic oil, silicone oil, gas

    Color:black

  • PTFE Gasket for boiler level gauge

    PTFE Gasket for boiler level gauge

    Teflon scientific name is polytetrafluoroethylene, short for PTFE, is the most commonly used material in fluorine polymer. Among the thermoplastic resins, PTFE has the best heat resistance, drug resistance and high frequency characteristics, but also has a unique low friction and non-adhesion.Teflon is a none-melt-Processible fluorin polymer, accounting for more than 60% of all fluorin polymers.Other melt-Processible fluorinated polymers include PVDF, FEP, E-CTFe, PVF, E-TFe, PFA, CTFE-VDF, etc. PTFE is the first fluorinated polymer to be discovered, and its properties are generally superior to other fluorinated polymers.

  • Fluorine Rubber Plate

    Fluorine Rubber Plate

    Fluorine rubber seals, when used for engine sealing, can work at 200℃~250℃ for a long time, at 300 and short-term work, its working life can be the same as the engine repair life, up to 1000~5000 flight hours (time 5~10 years); Used in the chemical industry, can seal inorganic acid (such as 67% sulfuric acid at 140℃, concentrated hydrochloric acid at 70℃, and 30% nitric acid at ℃), organic solvents (such as chlorinated hydrocarbons, benzene, high aromatic gasoline) and other organic matter (such as butadiene, styrene, propylene, phenol, fatty acids at 275℃, etc.); For deep well production, it can withstand harsh working conditions of 149℃ and 420 atmospheres. When used for superheated steam seals, it can work in steam medium of 160~170℃ for a long time. In the production of monocrystalline silicon, commonly used fluorine rubber seals to seal high temperature (300℃) under the special medium – trichlorosilicon, silicon tetrachloride, gallium arsenide, phosphorus trichloride, trichloroethylene and 120℃ hydrochloric acid, etc.

  • Viton sheet

    Viton sheet

    Viton sheet seals, when used for engine sealing, can work at 200℃~250℃ for a long time, at 300 and short-term work, its working life can be the same as the engine repair life, up to 1000~5000 flight hours (time 5~10 years); Used in the chemical industry, can seal inorganic acid (such as 67% sulfuric acid at 140℃, concentrated hydrochloric acid at 70℃, and 30% nitric acid at ℃), organic solvents (such as chlorinated hydrocarbons, benzene, high aromatic gasoline) and other organic matter (such as butadiene, styrene, propylene, phenol, fatty acids at 275℃, etc.); For deep well production, it can withstand harsh working conditions of 149℃ and 420 atmospheres. When used for superheated steam seals, it can work in steam medium of 160~170℃ for a long time. In the production of monocrystalline silicon, commonly used fluorine rubber seals to seal high temperature (300℃) under the special medium – trichlorosilicon, silicon tetrachloride, gallium arsenide, phosphorus trichloride, trichloroethylene and 120℃ hydrochloric acid, etc.